How do you take the Henry schein one step pregnancy test?

To use the Henry Schein One Step Pregnancy Test, follow these steps:

Collect urine: You can collect your urine in a clean container or use the provided urine cup. Make sure to collect midstream urine for the most accurate results.

Open the test device: Remove the pregnancy test device from its packaging and tear open the foil pouch. Take out the test device.

Prepare the test device: Hold the test device by the end with the absorbent tip pointing downwards.

Add urine: Holding the test device in a downward position, carefully urinate on the absorbent tip for a few seconds. Make sure to completely wet the absorbent tip with urine. Avoid touching the tip of the test device with your fingers.

Start the timer: Wait for 10-15 seconds once you have applied enough urine to the test pad.

Read the results: After 1-2 minutes, read the results of the pregnancy test. Two colored lines in the designated areas of the test device indicate you are pregnant. There should be one red or pink colored control line (C) and one red or pink line in the result window (T). Only one red or pink colored control line (C) in the designated areas of the test device means you are not pregnant.

Discard the test device: Dispose of the pregnancy test device properly according to your local regulations.

Please note that these instructions are general guidelines, and it's important to read and follow the specific instructions provided in the packaging of your Henry Schein One Step Pregnancy Test. Always consult with a healthcare professional to verify the results of any home pregnancy test.