How do you asphalt shingle roofing?

## How to Asphalt Shingle Roofing

1. Prepare the roof.

- This includes removing any old roofing material, repairing any damaged areas, and installing ice and water shield in areas where ice dams are a problem.

2. Install the starter strip.

- The starter strip is a special type of shingle that is installed along the eave of the roof. It helps to protect the roof from water damage.

3. Install the first course of shingles.

- Start at the bottom of the roof and work your way up. Overlap each shingle by the amount specified by the manufacturer.

4. Install the remaining courses of shingles.

- Continue installing shingles, overlapping each course by the specified amount. Make sure to stagger the joints between the shingles so that they don't line up.

5. Install the ridge cap.

- The ridge cap is a special type of shingle that is installed at the peak of the roof. It helps to protect the roof from water damage.

6. Clean up the roof.

- Once the shingles are installed, clean up any debris that may have accumulated on the roof.

Here are some additional tips for installing asphalt shingle roofing:

- Make sure that the nails are driven in straight and flush with the surface of the shingles.

- Don't over-nail the shingles, as this can damage them.

- If you're working on a steep roof, use a safety harness to prevent falls.

- Asphalt shingle roofing is a relatively easy DIY project, but it's important to follow the manufacturer's instructions carefully to ensure a successful installation.