Heat Pump Sizing Rule of Thumb for 180 m² Home

Quick Estimate vs. Professional Load Calculation

For a 180 m² (~1,938 ft²) house, a rough heating capacity estimate:

1,938 ft² × 25 BTU/hr/ft² ≈ 48,450 BTU/hr (≈ 14.2 kW or 4-ton equivalent).

Critical Factors That Change This Number

  • Climate zone (design temperature)
  • Insulation levels (walls, attic, foundation)
  • Window/door U-values and orientation
  • Air tightness (ACH50)
  • Internal gains (occupants, appliances, lighting)
  • Desired indoor setpoints
  • Heat pump type (air-source, ground-source, dual-fuel)

Why You Need a Manual J / ACCA Calculation

  • Oversizing → short-cycling, poor dehumidification, higher cost.
  • Undersizing → inability to maintain temperature, auxiliary heat overuse.
  • Right-sizing maximizes efficiency, comfort, and equipment life.

Bottom line: Use the rule of thumb only for preliminary budgeting. Hire a qualified HVAC contractor to perform a full load calculation before purchasing.

Heat Stroke - Related Articles