Sterile Water Production: A Step-by-Step Guide

To make sterile water, you will need the following materials:

* A pressure cooker

* A large pot

* A glass or stainless steel container

* Distilled water

Instructions:

1. Fill the pressure cooker with about 2 inches of water.

2. Place the glass or stainless steel container inside the pressure cooker.

3. Fill the container with distilled water.

4. Close the pressure cooker and lock the lid.

5. Place the pressure cooker over medium-high heat and bring the water to a boil.

6. Once the water is boiling, reduce the heat to low and let the pressure cooker simmer for 15 minutes.

7. After 15 minutes, turn off the heat and let the pressure cooker cool down naturally.

8. Once the pressure cooker has cooled down, remove the glass or stainless steel container from the cooker.

9. The water in the container is now sterile and can be used for any purpose.

Note: Sterile water should be stored in a clean, sealed container to prevent contamination.