DIY Herb Grinder from Coffee Grinder: 6-Step Construction Guide

Materials

• Coffee grinder (blade or burr)
• Wooden block/base
• Strong adhesive (epoxy recommended over super glue)
• Drill and bits
• Sandpaper/file

Steps

1. Disassemble grinder: Remove blades, removable parts. Clean/dry thoroughly.
2. Mount to wood: Position securely, epoxy firmly. Cure fully.
3. Drill herb-holding holes: Around grinder perimeter. Size/number per preference. Depth: hold herbs, don't obstruct mechanism.
4. Smooth edges: Sand/file burrs for safety.
5. Reassemble grinder: Reattach parts. Verify function.
6. Test: Grind herbs—check consistency, ease of use.

Maintenance

Clean thoroughly after each use. Wood base may need occasional resealing.

Note: Blade grinders chop; burr grinders produce more consistent results. Consider a dedicated herb grinder for frequent use.